150 Litre Belt Drive Compressor

150 Litre Belt Drive Compressor

£839.00 GBP
Skip to product information
150 Litre Belt Drive Compressor

150 Litre Belt Drive Compressor

£839.00 GBP
Taxes included. Shipping calculated at checkout.

150 Litre Belt Drive Compressor: a 3 horsepower cast iron twin cylinder compressor.

Compressors from home garage units to rotary screw machines for busy workshops. Size a compressor by the air your tools actually use, measured in free air delivered rather than displacement, which is the larger number printed on the tank.

Specification

  • Use: air tools, tyre inflation and spraying
  • Specification: a 3 horsepower cast iron twin cylinder compressor
  • Grade: workshop grade
  • Safety: CE and UKCA marked; read the manual and follow the safe working load, and train every user before first use
  • Weight: about 180 kg
  • Warranty: two years parts and labour

What arrives

  • Compressor
  • Regulator
  • Manual

Delivery installation and use

Check your supply before ordering. Single phase machines run from a 230V supply but larger motors need a dedicated 16 or 32 amp circuit; three phase machines need a 400V supply. An electrician should make the final connection. Air receivers used at work fall under the Pressure Systems Safety Regulations and need a written scheme of examination. We can supply one with a commercial compressor and carry out the periodic examinations. Larger items are delivered on a tail lift vehicle to ground level. Tell us about steps, narrow gates or a gravel drive when you order and we will plan around them. Finance is available on larger items for business and personal customers, subject to status and approval, spread over one to five years. Business customers can often offset the cost against tax, which your accountant can confirm. We supply workshop equipment to independent garages, tyre and MOT centres, fleet workshops and home mechanics, and we install and service what we sell. We describe each machine by what it is built to do rather than by brochure numbers, and we will tell you if a cheaper machine suits your work better.

Which version to buy

Standard is the specification we recommend for most buyers. There is one version of this because it is the one we recommend.

Survey before install

We check the floor, ceiling and power before a lift is fitted. What we check

Installed by our engineers

Positioned, anchored, commissioned and handed over with a written record. Installation

LOLER and servicing

Six monthly thorough examinations and annual service contracts. Book

Delivery

UK from £4.95. Machines by tail lift vehicle to ground level. Rates

Also for this bay